Product code  Product picture  Product full name and installation
SUR-TTL-Half Jacket Surgitel TTL- Oakley Half Jacket large U-bracket mount.
  • Back out the set screw until it is flush with the inside of the mount.
  • Slide the nose bridge (frame) into the opening of the U-bracket mount.
  • Tighten down set screw once mount is in place.
  • Done!
SUR-TTL-Oakley M  Oakley M

 

Surgitel TTL - Oakley design M frame

  • Back out the set screw until it is flush with the inside of the mount.
  • Slide the nose bridge (frame) into the opening of the U-bracket mount.
  • Tighten down set screw once mount is in place.
  • Done!
SUR- TTL-SG Plate

Surgitel TTL - All frames with SG plate 

  • Ensure grey Linkage Arm is up.
  • Slide mount onto mounting plate, ensuring the Linkage Arm is up.
  • Push down into place.
  • Done!
SUR-TTL-Dovetail

Surgitel TTL - All frames with "Dovetail" (Installation in PDF)

  • Ensure the round side of the dovetail mount is facing downward.
  • Insert the Dovetail mount into the frame round side down.
  • Done! Make sure it's in there all the way.
SUR-TTL-Aero

Surgitel TTL - Aero Titanum, Aero 2.0 

  • Back out the set screw until it is flush with the inside of the mount.
  • Slide the nose bridge (frame) into the opening of the U-bracket mount.
  • Tighten down set screw once mount is in place.
  • Done!
SUR- Flip Up 

Surgitel - Flip up - Cross bar (Note: Flip up mounts are available in different size, such as micro / small / medium/large. Please contact to inquire if you are not sure.)

  • Ensure the grey Linkage Arm is oriented on top.
  • Slide mount onto crossbar.
  • Done!
SUR-TTL-Flak Jacket

Surgitel TTL- Oakley Flak Jacket mount.

  • Back out the set screw until it is flush with the inside of the mount.
  • Slide the nose bridge (frame) into the opening of the U-bracket mount.
  • Tighten down set screw once mount is in place.
  • Done!
SUR-TTL-Flak 2.0

Surgitel TTL- Oakley Flak 2.0 mount.

  • Back out the set screw until it is flush with the inside of the mount.
  • Slide the nose bridge (frame) into the opening of the U-bracket mount.
  • Tighten down set screw once mount is in place.
  • Done!

 

Reference loupe models to the connectors

Connector product codes References Loupe models (Note: there may differ due to the hardware development)
SUR-TTL-Half Jacket

Oakley Half Jacket Large U-Bracket

SUR-TTL-Oakley M 

Oakley M-frame

SUR- TTL-SG Plate

Oakley Radar

SUR-TTL-Dovetail

Surgitel Dovetail

SUR-TTL-Aero

Aero Titanium Short U-Bracket

SUR- Flip Up

Micro Ocular Micro Flip-Up

Ultralight Ocular Medium Flip-Up

Prism Ocular Medium Flip-Up

SUR-TTL-Flak Jacket

Oakley Flak Jacket

SUR-TTL-Flak 2.0

Oakley Frame Flak 2.0

SurgiTel - New Oakley #Loupes - Flak 2.0 and Radar EV in a... | Facebook

All the Other Oakley frames use 

Universal Clip (included in the standard sale package)

Other Oakley