Product code Product picture Product full name and installation
PER-TTL-Adivista 

Perioptix TTL Adivista mount

  • Hook the larger arm of the mount over the top of the frame.
  • Push down on the grey linkage arm to snap the mount into place.
  • Done!
PER-TTL-Titanium

Perioptix Ultralight Titanium U-bracket mount.

  • Back out the set screw until it is flush with the inside of the mount.
  • Slide the nose bridge (frame) into the opening of the U-bracket mount.
  • Tighten down set screw once mount is in place.
  • Done!
PER-Flip-up

Perioptix Flip-up mount (Note: the flip-up mounts are available in different sizes, such as small & 8mm)

  • Ensure the grey Linkage Arm is oriented on top.
  • Slide mount onto crossbar.
  • Done!

 

Reference loupe models to the connectors

Connector product codes References Loupe models (Note: there may differ due to the hardware development)
PER-TTL-Adivista 

Perioptix TTL Adivista

PER-TTL-Titanium

Perioptix TTL Ultralight Titanium

PER-Flip-up

Panoramic Hogies Advista T-Sight Golf - Small Flip-Up

Legacy Hogies Rimz Mirage Ultralight Tiatnium - 8mm Flip-Up

Panoramic Hogies - Small Flip-Up